制作简单漂亮的纸巾盒手工制作教程╭★肉丁网
制作简单漂亮的纸巾盒手工制作教程
/ liyanan1984 / 30187℃ 　
猜你喜欢：
以前做过两个纸巾盒，不过没有拍过程，这次又重新做了一个，有过程图片哦！挺简单的，我都是家里有什么材料就用什么的，首先把剪成比纸抽大一个小边的长方形，为了能够精确一点，我都是用尺量好，再用笔画下来才剪的。用的有的是药盒，有的是买东西时的外，材料随处可见。
然后将这几个纸板用胶带粘好，因为上面要做成盖子，所以不要全封上啊，后面有一处连接上就好。之后在顶部盖子的部位划出一块抽纸的位置。
接下来就是将好看的布料包在纸抽盒的外面！我现在没有好看的布料，就把不穿的牛仔裤剪了凑合一下了。
由于没有多余的工具，为了能够结实一点，这布料可都是缝上去的。虽然会有一点粗糙，但为了美观，缝的时候尽量让露在外面的线越少越好，越短越好，线的颜色要接近布的颜色，这样就看不出来啦！
为了能够更家美观，用花边将抽纸口包上一圈，这样是不是更好看了！
为了让盖子和盒身连接起来，我们要用一个扣子或是装饰物将其连接。
我没有好看的花布，如果各位家里有好看一点的布料，最后再配上一些漂亮的装饰一下，一定会更加漂亮哦！下面是之前我做的两个纸抽盒，粉色的那个是把我裙子的布剪下来一点包上去的，这个特别喜欢呢！绿色的没有粉色的漂亮，呵呵！是用窗帘的布做的。
扫描二维码到手机上浏览此文
我有相关配件／工具／材料包销售：
购买网址：
提交说明：本功能需要审核，只有与本文相关且有详细购买网址的宝贝才能通过审核。简易木工教程：无需车床，简单自制漂亮的木茶杯（木杯子）制作教程
一个笨方便，但同时也是一个简单的制作方法，不使用车床，只使用传统的砂带、砂纸，或便宜的电动工具，手工制作一个木质的茶杯。翻译为意译，为避免歧义，放上原文。工具/原料木头、锯子、砂纸、核桃油、蜂蜡 可选：电钻、砂光机、Dremel电动打磨器原教程：作者：翻译：西渡翻译太辛苦了，不许转载！方法/步骤1、获得木材 Getting Your Wood教程中作者在自家院子的一棵死掉的树上锯下了一个树瘤。If you look at my finished product you will see that it's got a funky grain to it. This is because it's what's called a burl. I'll let you look it up if you want to know more but they have the cool wood grain patterns. For my cup I cut off a chunk of this recently dead cedar tree in my back yard.2、初步塑形 Rough Shaping使用刀和锯子，对树瘤进行简单的塑形，去掉树皮，突出物，尽可能的让木材成半圆形。The next step is to saw off any protrusions and make it as semi circular as possible. I just used a regular saw and a clamp for this step but you can do it how you see fit.3、砂带打磨& Belt Sanding?使用带式砂磨机，对木材进行打磨。This next step could probably be skipped depending on how symmetrical you cut your burl, but this definitely makes things easier. All I did was run it against the belt sander to fine tune the shape a bit more.?4、杯子外侧成形& Starting To Look Like A Cup!?因为没有车床，只好找一个权宜之计。首先，用金属锯去掉螺丝的顶部，然后钉入木块的正中心，再用一段绳子一边绑住钉子，一边绑住铅笔，以钉子为中心划一个圆圈。现在，请先带上护目镜，以及保护手套。然后一只手控制电钻，一只手按住砂纸，对杯子的外侧进行打磨处理。如果有砂光机的话，则使用砂光机打磨外侧，总之，杯子外侧成形 。Here's where things get makeshift. I don't have a lathe to get the cup shaped perfectly so instead I used a drill. So first I got a screw and cut off the head with a metal saw. Then I clamped down on this screw with my drill as if it were a drill bit. Then I drove the screw into the middle of the cup. From there with a piece of string I drew a perfect circle the size I wanted the cup to be. Then comes the fun part! You then turn the drill on slowly while holding it in one hand to control speed and in the other hand you hold sandpaper up to your cup. Always remember to wear safety glasses and make sure your wood is extremely extremely secure. If you don't, technically the wood could fly off and hurt someone or something! Another good idea would be to use thick sanding belt sand paper so it doesn't burn through and also a must would be to use gloves. Other than that just shape it however you think looks best.5、挖杯子的中间部分 Cutting Out The Middle?接下来，是最耗时间的部分。首先，在画的圆圈内，尽量的使用电钻打孔，然后，使用dremel电动打磨器，如果你没电动打磨器的话，可以使用木工刀具和砂纸，但就会特别费时间。Ok I'm not gunna lie this is the most time consuming part, but this is the only way I could think of with the tools I had available. First I drilled a bunch of holes into the cup to make cutting out the middle easier. Make sure you don't drill too deeply by taping off the drill bit to the length you want to drill. Then to take out more of the wood I started using a pocket knife and that worked alright, but I ended up borrowing a friends dremel. If you don't have a dremel it's going to take a while and even if you do I would suggest doing a lot of the end work by hand because it's very easy to take too much off with a dremel. But next just use course to fine grit sand paper to get the walls as thin as possible.6、细砂纸打磨 Fine Grit Sanding等杯子的形状基本出来之后，现在进行最后的完善工作，使用细砂纸进行打磨。Your almost there all the hard work is done! Next just go over everything with a fine grit sandpaper and get it as smooth as you possibly can with the highest grit paper you have. The pictures I have of this step are of the cup dipped in water so I could see how it might look when finished.7、防护处理 Finishing The Cup打磨完成之后，选择核桃油和蜂蜡进行防水和护理，将纸巾浸透核桃油中，然后涂在杯子上，等待干燥一晚上。然后进行第二次的核桃油处理。最后一层使用蜂蜡。There are many finishes that can be used but I chose walnut oil and bees wax for a couple if reasons. Number one being that it creates a waterproof and food safe seal for the wood. I bought them both on eBay for a couple bucks and I use them for all my food safe items. Basically I just use a paper towel to put a layer of walnut oil on the wood and then let it dry overnight. For this cup I put three layers then I smooshed on a layer of beeswax.8、完工 Done!
西渡的作品
真心不错，纯朴自然，有故事！关键英文翻译也很牛逼！
这个不错，哪天我也回家弄一个。
最后一步，蜜蜡怎么上？融化了再涂上？
丑木头疙瘩变身，要是弄块金丝楠木，肯定漂亮~翻译太辛苦了，必须不转载
@ 融化就可以，不过觉得加蜜蜡有点多余，直接核桃油或橄榄油就可以
@ 融化就可以啦
@ 哈哈，谢谢，翻译不是我的强项，只能意译。
杯子拿来喝水， 蜜蜡和核桃油这些是不是有种类挑选，类似可食用的啊？
@ 是的，而且本身的效果也很好。
很不错的呢！翻译很好呀！看英文
只是大概能读懂而已！佩服
其它&&北京
| 新浪微博
添加到您的RSS阅读器
使用以下账号登陆
手工客帐号登录废旧纸筒手工制作漂亮的小鸡教程（简单）―手工制作网
&|&&|&&|&&|&&|&&|&&|&&|&&|&&|&&|&
您的位置：&&>>&&>>&&>>&正文
& 废旧纸筒手工制作漂亮的小鸡教程
&&&&&&荐&&★★★
废旧纸筒手工制作漂亮的小鸡教程（简单）
来源：&&&&更新时间： 21:50:19
废旧纸筒手工制作漂亮的小鸡教程（简单）
制作材料：两个卷纸芯、彩色纸、两对摇晃塑料眼睛、羽毛、颜料、胶水、剪刀、小刀制作方法：1、在卷纸芯上面用彩纸包裹好，并用胶水黏好，之后用剪刀裁剪一个小三角形黏在卷纸芯上，再把眼睛黏上去。 2、用小刀在两侧面划个小口子，把涂油颜色的羽毛插上去。 3、在顶端前面涂上胶水，并黏上羽毛。
废旧纸筒手工制作漂亮的小鸡教程
废旧纸筒手工制作漂亮的小鸡教程
废旧纸筒手工制作漂亮的小鸡教程
手工推荐：变废为宝&
上一个手工： 下一个手工：
&[]&[]&[]&[]&[]&[]
& 手工制作导航
&& 推荐手工
[][][][][][][][][]下一段即将播放：播放：14250次
节目标题：手工制作玫瑰花 简单玫瑰花的折法教程
米客：岁月的童话
简介：手工制作玫瑰花 简单玫瑰花的折法教程