ISO焊接标准(ISO welding standards)
ISO焊接标准(ISO welding standards)
环境试验.第2部分:试验.试验T:带导线装置的可焊接性和焊接热抵抗性的试验方法
Environmental testing - Part 2: Tests - Test T: Test methods for soldeability and resistance to soldering heat of devices with leads
环境试验.第2-58部分:试验.试验Td:表面安装元器件(SMD)用可焊性、耐金属化溶融和耐焊接热的试验方法
Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)
IEC 60317-35 Edition 1.2-2000
绕阻线特殊类型规范.第35部分:155级带粘合层的可焊接的聚氨酯瓷漆园形铜线
Specifications for particular types of winding wires - Part 35: Solderable polyurethane enamelled round copper wire, class 155, with a bonding layer
特种绕组线规范.第35部分:155级有粘结层的可焊接聚氨酯漆包圆铜线
Specification for particular ty part 35: solderable polyurethane enamelled round copper wire, class 155, with a bonding layer
IEC 60317-36 Edition 1.2-2000
绕阻线特殊类型规范.第36部分:180级带粘合层的可焊接的聚酯瓷漆园形铜线
Specifications for particular types of winding wires - Part 36: Solderable polyesterimide enamelled round copper wire, class 180, with a bonding layer
特种绕组线规范.第36部分:180级带粘结层的可软焊接聚酰胺酯漆包圆铜线
Specifications for particular ty part 36: solderable polyesterimide enamelled round copper wire, class 180, with a bonding layer
特种绕组线规范.第55部分:涂覆聚酰胺的可焊接聚亚安酯漆包圆铜线.180级
Specifications for particular types of winding wires - Part 55: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 180
电子设备用连接器.试验和测量.第12-1部分:焊接试验.试验12a: 焊料湿浴法测量可焊性
Connectors for electronic equipment - Tests and measurements - Part 12-1: Soldering tests - Test 12a: Solderability, wetting, solder bath method
半导体器件.机械和气候试验方法.第20部分:SMDs塑料囊状物抗湿气和焊接热的综合影响
Semiconductor devices - Mechanical and climatic test methods - Part 20: Resistance of plastic-encapsulated SMDs to the combined effect of moisture and soldering heat
电弧焊接设备.第4部分:运行中检查和试验
Arc welding equipment - Part 4: In-service inspection and testing
弧焊设备.第1部分:焊接电源
Arc welding equipment - Part 1: Welding power sources
弧焊设备.第12部分:焊接电缆的耦合器
Arc-welding equipment - Part 12: Coupling devices for welding cables
电弧焊接设备.第2部分:液体冷却系统
Arc welding equipment - Part 2: Liquid cooling systems
弧焊设备.第8部分:焊接和等离子切割系统用气体控制台
Arc welding equipment - Part 8: Gas consoles for welding and plasma cutting systems
电子设备用连接器 第4 -107部分：有质量评定的印制板连接器 基本网格为2.0mm，固定件有印制版的焊接终端
Connectors for electronic equipment - Part 4-107: Printed board connectors w Detail specification for shielded two-part connectors having a basic grid of 2,0 mm, fixed part with solder and press-in terminations for printed boards, free part with non-accessible insulation displacement and crimp terminations
印制电路板和印制电路板组件.设计和使用.第5-2部分:焊接(焊接区/焊缝)考虑.分立器件
Printed boards and printed board assemblies - Design and use - Part 5-2: Attachment (land/joint) Discrete components
印制板和印制板组件.设计和使用.第5-3部分:焊接(焊接区/接缝)考虑.两面带有翅形引线的部件
Printed boards and printed board assemblies - Design and use - Part 5-3: Attachment (land/joint) considerations - Components with gull-wing leads on two sides
印制板和印制板组件.设计和使用.第5-4部分:焊接(焊接区/接缝)考虑.两面带有J形引线的部件
Printed boards and printed board assemblies - Design and use - Part 5-4: Attachment (land/joint) considerations - Components with J leads on two sides
印制板和印制板组件.设计和使用.第5-5部分:焊接(焊接区/接缝)考虑.四面带有翅形引线的部件
Printed boards and printed board assemblies - Design and use - Part 5-5: Attachment (land/joint) considerations - Components with gull-wing leads on four sides
AMD 1-2010
电子组件用连接材料.第1-3部分:电子焊接用电子级钎焊合金及有焊剂和无焊剂的固体焊料用要求
Attachment materials for electronic assembly - Part 1-3: Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solder for electronic soldering applications
电子组件用连接材料.第1-3部分:电子焊接用电子级钎焊合金及有焊剂和无焊剂的固体焊料用要求
Attachment materials for electronic assembly - Part 1-3: Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solders for electronic soldering applications
印刷电路板组件 第1部分:总规范 使用表面安装和相关装配技术的焊接电气和电子组件的要求
Printed board assemblies - Part 1: Generic specification - Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies
印刷电路板组件 第2部分:分规范 表面安装焊接组件的要求
Printed board assemblies - Part 2: Sectional specification - Requirements for surface mount soldered assemblies
印刷电路板组件 第3部分:分规范 通孔安装焊接组件的要求
Printed board assemblies - Part 3: Sectional specification - Requirements for through-hole mount soldered assemblies
印刷电路板组件 第4部分:分规范 端点焊接组件的要求
Printed board assemblies - Part 4: Sectional specification - Requirements for terminal soldered assemblies
印刷电路板组件.第6部分:球栅阵列和网格阵列的焊接接头内空隙及测量方法用评定标准
Printed board assemblies - Part 6: Evaluation criteria for voids in soldered joints of BGA and LGA and measurement method
焊接电子组件的工艺要求.第5部分:焊接电子组件的再加工、改进和检修
Workmanship requirements for soldered electronic assemblies - Part 5: Rework, modification and repair of soldered electronic assemblies
表面贴装技术.第3部分:通孔回流(THR)焊接用组件规范的标准方法
Surface mounting technology - Part 3: Standard method for the specification of components for through hole reflow (THR) soldering
弧焊接设备.安装和使用
Arc welding equipment - Installation and use
电阻焊接设备.第1部分:设计、制造和安装用安全要求
Resistance welding equipment - Part 1: Safety requirements for design, manufacture and installation
电阻焊接设备.第2部分:电磁兼容性(EMC)要求
Resistance welding equipment - Part 2: Electromagnetic compatibility (EMC) requirements
表面安装技术.表面安装焊接接缝的环境和耐久性试验方法.第1-1部分:拉拔强度试验
Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-1: Pull strength test
表面安装技术.表面装配焊接接缝的环境和耐久性试验方法.第1-2部分:剪切强度试验
Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-2: Shear strength test
IEC/PAS 62174 Edition 1.0-2000
通孔固定装置的焊接温度抗性
Resistance to soldering temperature for through-hole mounted devices
ISO 10042 Technical Corrigendum 1-2006
焊接.铝和铝合金的弧焊接头.缺陷质量分级.技术勘误1
Welding - Arc-welded joints in aluminium and its alloys - Quality leve Technical Corrigendum 1
焊接 铝和铝合金的弧焊接头 缺陷质量分级指南
Welding - Arc-welded joints in aluminium and its alloys - Quality levels for imperfections
压力用途的无缝钢管和焊接(埋弧焊除外)钢管 层状缺陷检测用超声检验
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes - Ultrasonic testing for the detection of laminar imperfections
压力用途的无缝钢管和焊接(埋弧焊除外)钢管 验证液压防泄漏用超声波检验
Seamless and welded (except submerged arc-welded) steel tubes f ultrasonic testing for verification of hydraulic leak-tightness
焊接.点焊、凸焊和有缝焊的剥离和凿剥离试验
Resistance welding - Peel and chisel testing of resistance spot and projection welds
储气瓶.焊接的碳素钢储气瓶.定期检验和试验
Gas cylinders - Welded carbon-steel gas cylinders - Periodic inspection and testing
气瓶.液化石油气(LPG)用可再填充的焊接钢制气瓶.周期检验和试验
Gas cylinders - Refillable welded steel cylinders for liquefied petroleum gas (LPG) - Periodic inspection and testing
压力用无缝及热拉伸焊接钢管 全周边超声波厚度检测
Seamless and hot-stretch-reduced welded steel tubes f full peripheral ultrasonic thickness testing
钢筋混凝土和制造焊接网用冷轧钢丝
Cold-reduced steel wire for the reinforcement of concrete and the manufacture of welded fabric
ISO 10656 Technical Corrigendum 1-2000
电阻焊接 焊接枪用电源积分变压器 技术勘误1
Electric resistance welding - Integrated transform Technical Corrigendum 1
电阻焊接 焊接枪用电源积分变压器
Electric resistance welding - Integrated transformers for welding guns
气瓶.液化石油气(LPG)用可再填充的焊接钢制气瓶.装填前后及装填期间的检验规程
Gas cylinders - Refillable welded steel cylinders for liquified petroleum gas (LPG) - Procedures for checking before, during and after filling
焊接耗材.铸铁熔焊用涂敷电焊条、焊丝、焊棒和药芯焊条.分类
Welding consumables - Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron - Classification
液压传动 端面平齐的无缝和焊接型精密钢管 尺寸及标称工作压力
Hydraulic fluid power - Plain-end, seamless and welded precision steel tubes - Dimensions and nominal working pressures
结构钢 冷成型、焊接、中空结构截面 技术交货要求
Structural steels - Cold-formed, welded, structural hollow sections - Technical delivery requirements
焊接和相关工艺的卫生和安全 操作人员呼吸区域的空气中悬浮颗粒物及气体的取样 第1部分：空气中悬浮颗粒
Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles
焊接和相关工艺的卫生与安全 工作人员呼吸区域中空气中悬浮颗粒物及气体的取样 第2部分:气体取样
Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases
钢筋混凝土结构用焊接网认证方案
Certification scheme for welded fabric for the reinforcement of concrete structures
压力用途的承压无缝和焊接钢管 层间不完整性检查的管端超声波检测
Seamless and welded steel tubes f ultrasonic testing of tube ends for the detection of laminar imperfections
焊接和类似工艺用防护服装
Protective clothing for use in welding and allied processes
钢铸件制造焊接焊接工艺的规范和验收
Specification and approval of welding procedures for production welding of steel castings
压力用途的承压焊接钢管 焊接钢管用钢带/钢板分层缺陷检测用超声波试验
Welded steel tubes for pressure purposes - Ultrasonic testing for the detection of laminar imperfections in strips/plates used in the manufacture of welded tubes
压力用途的承压无缝和焊接钢管 液体渗透试验
Seamless and welded steel tubes for pressure purposes - Liquid penetrant testing
压力用途的承压埋弧焊接钢管 焊缝缺陷检测用X射线检查
Submerged arc-welded steel tubes for pressure purposes - Radiographic testing of the weld seam for the detection of imperfections
气焊设备 焊接及相关工艺用热塑性软管
Gas welding equipment - Thermoplastic hoses for welding and allied processes
塑料管材和管件.熔解焊接聚乙烯系统用设备.第2部分:电熔焊
Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 2: Electrofusion
塑料管材和管件.聚乙烯系统的熔焊接设备.第3部分:操作者标记
Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 3: Operator's badge
压力用途的承压焊接钢管 焊缝周围分层缺陷检测用超声波试验
Welded steel tubes for pressure purposes - Ultrasonic testing of the area adjacent to the weld seam for the detection of laminar imperfections
压力用途的承压无缝和焊接钢管 管端分层组织缺陷探测用磁粉检验
Seamless and welded steel tubes for pressure purposes - Magnetic particle inspection of the tube ends for the detection of laminar imperfections
压力用途的承压无缝和焊接钢管 管身表面缺陷探测用磁粉检验
Seamless and welded steel tubes for pressure purposes - Magnetic particle inspection of the tube body for the detection of surface imperfections
ISO 13847 Technical Corrigendum 1-2001
石油和天然气工业.管道输送系统.管道焊接.技术勘误1
Petroleum and natural gas industries - Pipeline transportation systems - W Technical Corrigendum 1
石油和天然气工业 管道输送系统 管道的焊接
Petroleum and natural gas industrie - Pipeline transportation systems - Welding of pipelines
焊接 预热温度、道间温度和预热维持温度测量的指南
Welding - Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
焊接.螺柱电弧焊用螺柱和陶瓷套圈
Welding - Studs and ceramic ferrules for arc stud welding
焊接 电子束和激光焊接头 缺陷的质量分级指南 第1部分:钢
Welding - Electron and laser-beam welded joints - Guidance on quality levels for imperfections - Part 1: Steel
焊接 电子束和激光束焊接接头 缺陷质量等级指南 第2部分：铝及其可焊合金
Welding - Electron and lase Guidance on quality levels for imperfections - Part 2: Aluminium and its weldable alloys
焊接 焊接结构的一般公差 长度和角度的尺寸 形状和位置
Welding - General tolerances for welded constructions - Dimensions for lengths and angles - Shape and position
ISO 13950 Technical Corrigendum 1-2008
塑料管和配件.电熔焊接头的自动识别系统.技术勘误1
Plastics pipes and fittings - Automatic recognition systems for
Technical Corrigendum 1
塑料管和配件.电熔焊接头的自动识别系统
Plastics pipes and fittings - Automatic recognition systems for electrofusion joints
气焊设备 焊接、切割及相关工艺用的乙炔汇流系统 一般要求
Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - General requirements
焊接消耗品.镍和镍合金的手工金属弧焊用涂敷焊条.分类
Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification
焊接消耗品.埋弧焊用助熔剂.分类
Welding consumables - Fluxes for submerged arc welding - Classification
焊接消耗品.熔焊及相关工艺用气体和气体混合物
Welding consumables - Gases and gas mixtures for fusion welding and allied processes
电阻点焊和凸焊.焊接破坏试验.影响剪切试验和剪切试验的样本尺寸和程序
Resistance spot welding and projection welds - Destructive testing of welds - Specimen dimensions and procedure for impact shear test and cross-tension testing
电阻焊接.电阻点焊、凸焊和缝焊用可焊性瓣轮的测定规程
Resistance welding - Procedures for determining the weldability lobe for resistance spot, projection and seam welding
电阻焊接.焊缝的有损检验.电阻点焊、滚焊和凸焊焊缝的疲劳类型和几何学上的测量
Resistance welding - Destructive tests of welds - Failure types and geometric measurements for resistance spot, seam, and projection welds
焊接消耗品.非合金钢和细粒钢的金属气体保护焊用焊丝和焊接沉积物.分类
Welding consumables - Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification
焊接消耗品.填充物材料和助熔剂的采购
Welding consumables - Procurement of filler materials and fluxes
疲劳.焊接中空部件连接件用设计程序.推荐
Fatigue - Design procedure for welded hollow-section joints - Recommendations
焊接耗材 通过测量扩散氢方法测定手工电弧焊焊条的抗湿性
Welding consumables - Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen
电阻焊接.无涂层和有涂层低碳钢的点焊程序
Resistance welding - Procedure for spot welding of uncoated and coated low carbon steels
焊接质量要求 金属材料的电阻焊接 第1部分:完整质量要求
Quality requirements for welding - Resistance welding of metallic materials - Part 1: Comprehensive quality requirements
焊接质量要求 金属材料的电阻焊接 第2部分:基本质量要求
Quality requirements for welding - Resistance welding of metallic materials - Part 2: Elementary quality requirements
焊接.金属材料的电弧螺栓焊
Welding - Arc stud welding of metallic materials
焊接管理.任务和职责
Welding coordination - Tasks and responsibilities
焊接人员 金属材料的完全机械化焊接和自动焊接的熔化焊及电阻焊操作人员的资格审查
Welding personnel - Approval testing of welding operators for fusion welding and of resistance weld setters for fully mechanized and automatic welding of metallic materials
焊接.电子束焊接机器的验收检验.第1部分:原则和验收条件
Welding - Acceptance inspection of electron beam welding machines - Part 1: Principles and acceptance conditions
焊接 电子束焊接机的验收检验 第2部分:加速电压特性的测量
Welding - Acceptance inspection of electron beam welding machines - Part 2: Measurement of accelerating voltage characteristics
焊接 电子束焊接机的验收检验 第3部分:电子束电流特性的测量
Welding - Acceptance inspection of electron beam welding machines - Part 3: Measurement of beam current characteristics
焊接 电子束焊接机的验收检验 第4部分:焊接速度的测量
Welding - Acceptance inspection of electron beam welding machines - Part 4: Measurement of welding speed
焊接 电子束焊接机的验收检验 第5部分:偏转精度的测量
Welding - Acceptance inspection of electron beam welding machines - Part 5: Measurement of run-out accuracy
焊接 电子束焊接机的验收检验 第6部分:焊点位置稳定性的测量
Welding - Acceptance inspection of electron beam welding machines - Part 6: Measurement of stability of spot position
焊接和相关工艺中的健康和安全.烟尘和气体的实验室取样方法.第1部分:电弧焊产生的烟尘排放率测定和烟尘采集
Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 1: Determination of fume emission rate during arc welding and collection of fume for analysis
焊接和相关工艺中的健康和安全.对电弧焊产生的烟尘和气体取样的实验室方法.第2部分:在电弧焊,切削加工和刨
Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 2: Determination of the emission rates of carbon monoxide (CO), carbon dioxide (CO), nitrogen monoxide (NO) and nitrogen dioxide (NO) during arc welding, cutting and gouging
焊接和相关工艺的健康和安全.烟和气体取样的实验室法.第3部分:电弧焊时臭氧排放率的测定
Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 3: Determination of ozone emission rate during arc welding
ISO 15011-4 AMD 1-2008
焊接和相关工艺中的健康和安全.烟尘和气体取样用实验室方法.第4部分:烟尘数据单.修改件1
Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 4: F Amendment 1
焊接和相关工艺的卫生和安全.烟尘和气体取样的实验室方法.第4部分:烟尘数据单
Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 4: Fume data sheets
焊接和相关工艺中的健康和安全.空气过滤用设备的试验和标记要求.第1部分:焊接烟尘分离效率的试验
Health and safety in welding and allied processes - Requirements testing and marking of equipment for air filtration - Part 1: Testing of the separation efficiency for welding fume
焊接和相关工艺中的卫生和安全.空气过滤设备的要求、测试和标记.第2部分:采集罩和喷嘴的最小空气体积流率的
Health and safety in welding and allied processes - Requirements, testing and marking of equipment for air filtration - Part 2: Determination of the minimum air volume flow rate of captor hoods and nozzles
ISO 15607 Technical Corrigendum 1-2005
金属材料焊接过程的规范和鉴定.一般规则.技术勘误1
Specification and qualification of welding procedures for metallic materials - G Technical Corrigendum 1
金属材料焊接程序规范和合格鉴定.总则
Specification and qualification of welding procedures for metallic materials - General rules
ISO 15609-1 Technical Corrigendum 1-2005
金属材料焊接过程的规范和鉴定.焊接过程规范.第1部分:电弧焊接.技术勘误1
Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: A Technical Corrigendum 1
金属材料的焊接程序规范和鉴定.焊接程序规范.第1部分:弧焊
Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding
金属材料的焊接程序规范和鉴定 焊接程序规范 第2部分：气焊
Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 2: Gas welding
金属材料的焊接程序规范和鉴定.焊接程序规范.第3部分:电子束焊
Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 3: Electron beam welding
金属材料焊接工艺规范和条件限制.焊接工艺规范.第4部分:激光束焊接
Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 4: Laser beam welding
金属材料焊接程序的规范和鉴定.焊接程序规范.第5部分:电阻焊接
Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 5: Resistance welding
金属材料焊接程序规范和合格鉴定.基于试验焊接消耗品的合格鉴定
Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables
金属材料焊接程序规范和合格鉴定.根据已有焊接经验进行合格鉴定
Specification and qualification of welding procedures for metallic materials - Qualification based on previous welding experience
金属材料的焊接程序规范和鉴定.通过标准焊接程序的采用进行合格鉴定
Specification and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure
金属材料的焊接程序规范和鉴定.基于预生产焊接试验的鉴定
Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test
ISO 15614-1 AMD 1-2008
金属材料焊接工艺的规范和鉴定.焊接工艺试验.第1部分:钢的弧焊和气焊以及镍和镍合金的弧焊.修改件1
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nick Amendment 1
ISO 15614-1 Technical Corrigendum 1-2005
金属材料焊接过程的规范和鉴定.焊接过程试验.第1部分:钢的电弧焊接和气焊以及镍和镍合金的电弧焊接.技术勘
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nick Technical Corrigendum 1
金属材料焊接程序的规范和鉴定.焊接程序试验.第1部分:钢的电弧焊和气焊及镍和镍合金的电弧焊
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
金属材料焊接过程的规范和鉴定.焊接过程试验.第10部分:高压干焊
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 10: Hyperbaric dry welding
金属材料焊接程序的规范和鉴定.焊接程序试验.第11部分:电子和激光束焊接
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding
金属材料焊接程序的规范和鉴定.焊接过程试验.第12部分:点焊、缝焊和凸焊
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 12: Spot, seam and projection welding
金属材料焊接过程的规范和鉴定.焊接过程试验.第13部分:电阻对接焊和电弧对接焊
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 13: Resistance butt and flash welding
ISO 15614-2 Technical Corrigendum 1-2005
金属材料焊接过程的规范和鉴定.焊接过程试验.第2部分:铝及其合金的电弧焊接.技术勘误1
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of alum Technical Corrigendum 1
ISO 15614-2 Technical Corrigendum 2-2009
金属材料焊接程序的规范和鉴定.焊接程序试验.第2部分:铝及其合金的电弧焊接.修改件2
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of alum Amendment 2
金属材料焊接程序的规范和鉴定.焊接过程试验.第2部分:铝和铝合金电弧焊
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys
金属材料的焊接程序规范和合格鉴定.焊接程序试验.第3部分:非合金和低合金铸铁的熔焊
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 3: Fusion welding of non-alloyed and low-alloyed cast irons
ISO 15614-4 Technical Corrigendum 1-2007
金属材料焊接过程的规范和鉴定.焊接过程试验.第4部分:铝铸件的精工焊接.技术勘误1
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 4: Finishing welding o Technical Corrigendum 1
金属材料焊接过程的规范和鉴定.焊接过程试验.第4部分:铝铸件的精工焊接
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 4: Finishing welding of aluminium castings
金属材料焊接程序的规范和鉴定.焊接程序试验.第5部分:钛、锆及其合金的电弧焊
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys
金属材料焊接程序的规范和鉴定.焊接程序试验.第6部分:铜及其合金的电弧焊接和气焊
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 6: Arc and gas welding of copper and its alloys
金属材料焊接程序规范和鉴定.焊接程序试验.第7部分:覆盖焊接
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 7: Overlay welding
金属材料焊接程序的规范和鉴定.焊接程序试验.第8部分:管对管板接头焊接
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints
气焊设备.焊接、切割和相关工艺用乙炔复式接头系统.高压装置的安全要求
Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - Safety requirements in high-pressure devices
高质量焊接和切割用CO2激光射线机的验收试验.第1部分:通用原理和验收条件
Acceptance tests for CO-laser beam machines for high quality welding and cutting - Part 1: General principles, acceptance conditions
高质量焊接和切割用CO2激光射线机的验收试验.第2部分:静态和动态准确度的测定
Acceptance tests for CO-laser beam machines for high quality welding and cutting - Part 2: Measurement of static and dynamic accuracy
高质量焊接和切割用CO2激光射线机的验收试验.第3部分:气体流量和压力测量仪的校正
Acceptance tests for CO-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure
高质量焊接和切割用CO2激光光束机的验收试验.第4部分:带二维移动光学的机械
Acceptance tests for CO-laser beammachines for high quality welding andcutting —Part 4:Machines with 2-D moving optics
从事水下焊接的焊接员资格检验 第1部分：高压湿焊的潜水焊接员
Qualification testing of welders for underwater welding - Part 1: Diver-welders for hyperbaric wet welding
从事水下焊接的焊接员资格检验 第2部分：高压干焊的潜水焊接员和焊接操作员
Qualification testing of welders for underwater welding - Part 2: Diver-welders and welding operators for hyperbaric dry welding
焊接 金属材料的摩擦焊接
Welding - Friction welding of metallic materials
混凝土的钢筋和预应力用钢.试验方法.第2部分:焊接纤维
Steel for the reinforcement and prestressing of concrete - Test methods - Part 2: Welded fabric
焊接耗材 试验方法 第1部分:钢、镍和镍合金全焊金属试样的试验方法
Welding consumables - Test methods - Part 1: Test methods for all-weld metal test specimens in steel, nickel and nickel alloys
焊接耗材 试验方法 第2部分:钢单道焊和双道焊技术试样的制备
Welding consumables - Test methods - Part 2: Preparation of single-run and two-run technique test specimens in steel
ISO 15792-3 Technical Corrigendum 1-2006
焊接耗材.试验方法.第3部分:角焊中焊接耗材的根角熔深和填位能力的分类试验
Welding consumables - Test methods - Part 3: Classification testing of positional capacity and root penetration of welding consumab Technical Corrigendum 1
焊接耗材 试验方法 第3部分:角焊中焊接消耗品的根角熔深和填位能力的分类试验
Welding consumables - Test methods - Part 3: Classification testing of positional capacity and root penetration of welding consumables in a fillet weld
焊接消耗品.高强度钢的气体保护电弧焊用焊丝电极、焊丝、焊条和沉积金属.分类
Welding consumables - Wire electrodes, wires, rods and deposits for gas-shielded arc welding of high strength steels - Classification
焊接消耗品.非合金钢及细粒钢气体保护的和非气体保护金属弧焊用药芯电极.分类
Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels - Classification
焊接消耗品.不锈钢和耐热钢的气体保护和非气体保护金属弧焊用药芯电极和焊条.分类
Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification
焊接消耗品.耐蠕变钢的气体保护金属电弧焊用管状有芯焊条.分类
Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels - Classification
焊缝的无损检验.熔焊接头的放射检验
Non-destructive testing of welds - Radiographic testing of fusion-welded joints
焊缝的无损检验.熔焊接头的外观检验
Non-destructive testing of welds - Visual testing of fusion-welded joints
焊接的无损检验.焊接接头的超声波检验
Non-destructive testing of welds - Ultrasonic testing of welded joints
金属材料焊接的有损试验.焊接的热裂试验.弧焊工艺.第1部分:总则
Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - Part 1: General
金属材料焊接的有损试验.焊接的热裂试验.弧焊工艺.第2部分:自束试验
Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - Part 2: Self-restraint tests
金属材料焊接的有损试验.焊接的冷裂试验.弧焊工艺.第1部分:总则
Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 1: General
金属材料焊接的有损试验.焊接的冷裂试验.弧焊工艺.第2部分:自束试验
Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 2: Self-restraint tests
金属材料焊接的有损试验.焊接的冷裂试验.弧焊工艺.第3部分:外部载荷试验
Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 3: Externally loaded tests
焊接的无损检验.用矢量分析的焊接涡流检验
Non-destructive testing of welds - Eddy current testing of welds by complex-plane analysis
焊接.与焊接和相关工艺有关的工厂底漆的试验.第1部分:一般要求
Welding - Test for shop primers in relation to welding and allied processes - Part 1: General requirements
焊接.与焊接和相关工艺有关的工厂底漆的试验.第2部分:工厂底漆的焊接特性
Welding - Test for shop primers in relation to welding and allied processes - Part 2: Welding properties of shop primers
焊接.与焊接和相关工艺有关的工厂底漆的试验.第3部分:热切割
Welding - Test for shop primers in relation to welding and allied processes - Part 3: Thermal cutting
焊接.与焊接和相关工艺有关的工厂底漆的试验.第4部分:烟气排放
Welding - Test for shop primers in relation to welding and allied processes - Part 4: Emission of fumes and gases
金属材料焊接的破坏检验.电阻焊接.电阻缝焊的压力试验
Destructive tests on welds in metallic materials - Resistance welding - Pressure test on resistance seam welds
金属材料焊接的有损试验.测量δ铁素体用的取样方法
Destructive tests on welds in metallic materials - Method for taking samples for delta ferrite measurement
电阻焊.电阻焊用焊接电流测量.第1部分:测量指南
Resistance welding - Welding current measurement for resistance welding - Part 1: Guidelines for measurement
电阻焊.电阻焊用焊接电流测量.第2部分:电流感应线圈式焊接电流计
Resistance welding - Welding current measurement for resistance welding - Part 2: Welding current meter with current sensing coil
电阻焊.电阻焊用焊接电流测量.第3部分:电流感应线圈
Resistance welding - Welding current measurement for resistance welding - Part 3: Current sensing coil
电阻焊.电阻焊用焊接电流测量.第4部分:校验系统
Resistance welding - Welding current measurement for resistance welding - Part 4: Calibration system
电阻焊.电阻焊用焊接电流测量.第5部分:焊接电流测量系统的验证
Resistance welding - Welding current measurement for resistance welding - Part 5: Verification of welding current measuring system
焊接.氧气火焰切割、激光束切割和等离子体切割的缺陷
Welding - Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts - Terminology
焊接.图示焊接接头的多语种术语
Welding - Multilingual terms for welded joints with illustrations
焊接.钢筋焊接.第1部分:承载焊接接缝
Welding - Welding of reinforcing steel - Part 1: Load-bearing welded joints
焊接.钢筋焊接.第2部分:非承载焊接接缝
Welding - Welding of reinforcing steel - Part 2: Non load-bearing welded joints
焊接.焊接用设备的校正、验证和确认(包括辅助活动)
Welding - Calibration, verification and validation of equipment used for welding, including ancillary activities
焊接.焊接及相关工艺的热处理质量要求
Welding - Quality requirements for heat treatment in connection with welding and allied processes
焊接及相关工艺.健康和安全.电弧焊接和切割用设备和消耗品的无字预警标签
Welding and allied processes - Health and safety - Wordless precautionary labels for equipment and consumables used in arc welding and cutting
储气瓶.可再灌装的焊接不锈钢气瓶.第1部分:试验压力≤6MPa
Gas cylinders - Refillable welded stainless steel cylinders - Part 1: Test pressure 6 MPa and below
储气瓶.可再灌装的焊接不锈钢气瓶.第2部分:试验压力大于6MPa
Gas cylinders - Refillable welded stainless steel cylinders - Part 2: Test pressure greater than 6 MPa
道路车辆.3.5吨拖车.控制疲劳试验后联轴球焊接牵引支架
Road vehicles - Trailers up to 3,5 t - Control of welded towing brackets for coupling ball after fatigue testing
焊接消耗品.铝和铝合金焊接用焊丝电极、金属丝和棒材.分类
Welding consumables - Wire electrodes, wires and rods for welding of aluminium and aluminium alloys - Classification
ISO 18274 Technical Corrigendum 1-2005
焊接消耗品.镍和镍合金熔焊用焊丝和条式电极、焊线和焊条.分类.技术勘误1
Welding consumables - Wire and strip electrodes, wires and rods for fusion welding of nickel and nickel alloys - C Technical Corrigendum 1
ISO 18274 Technical Corrigendum 2-2006
焊接耗材.镍及镍合金熔焊用丝状和带状电极、焊丝和焊条.分类.技术勘误2
Welding consumables - Wire and strip electrodes, wires and rods for fusion welding of nickel and nickel alloys - C Technical Corrigendum 2
焊接消耗品.镍和镍合金电弧焊用焊丝和条式电极、金属线和棒材.分类
Welding consumables - Wire and strip electrodes, wires and rods for arc welding of nickel and nickel alloys - Classification
ISO 18275 Technical Corrigendum 1-2007
焊接耗材.高强度钢的手工金属电弧焊用涂覆电焊条.分类.技术勘误1
Welding consumables - Covered electrodes for manual metal arc welding of high-strength steels - C Technical Corrigendum 1
焊接消耗品.高强度钢的手工金属极电弧焊用涂覆电焊条.分类
Welding consumables - Covered electrodes for manual metal arc welding of high-strength steels - Classification
焊接消耗品.高强度钢的气体保护和非气体保护金属极电弧焊用药芯电极.分类
Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high-strength steels - Classification
钎焊.钎焊接头的缺陷
Brazing - Imperfections in brazed joints
电阻焊接.焊点破坏性试验.多点焊接样品的疲劳试验方法
Resistance welding - Destructive testing of welds - Method for the fatigue testing of multi-spot-welded specimens
电阻点焊接、电阻凸焊和电阻缝隙焊接.测定铝和钢材料的跃迁电阻
Resistance spot-, projection- and seam-welding - Method for determining the transition resistance on aluminium and steel material
电阻焊接.铝和铝合金的点焊.可焊接性、焊接和测试
Resistance welding - Spot welding of aluminium and aluminium alloys - Weldability, welding and testing
铜管用毛细管焊接接头 组装尺寸和试验方法
Capillary solder fitti Assembly dimensions and tests
气瓶.可再充装的焊接铝合金气瓶.设计、结构和试验
Gas cylinders - Refillable welded aluminium-alloy cylinders - Design, construction and testing
带法兰的六角焊接螺母
Hexagon weld nuts with flange
焊接消耗品.抗蠕变钢的气体保护电弧焊用丝状电极、焊丝、焊条和沉渍物. 分类
Welding consumables - Wire electrodes, wires, rods and deposits for gas-shielded arc welding of creep-resisting steels - Classification
金属材料焊缝的破坏性试验.激光和电子束焊接窄接头的硬度试验(维氏和努氏硬度试验)
Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests)
Nd:YAG激光射线焊接机器的加速试验.带光纤传送的机器.第1部分:激光装配
Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Part 1: Laser assembly
Nd:YAG激光射线焊接机器的加速试验.带光纤传送的机器.第2部分:移动装置
Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Part 2: Moving mechanism
电阻焊接.带组合变压器焊接枪用变压器整流器.1000 Hz频率工作变压器整流器
Resistance welding - Transformer-rectifier for welding guns with integrated transformers - Transformer-rectifier units operating at 1000 Hz frequency
储气瓶.液化石油气用可运输的可再填充焊接钢瓶.设计和建造
Gas cylinders - Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) - Design and construction
焊接无损测试.焊接的磁性颗粒测试.验收水平
Non-destructive testing of welds - Magnetic particle testing of welds - Acceptance levels
ISO 24034 AMD 1-2008
焊接消耗品.钛和钛合金的熔焊用实心焊丝和焊条.分类.修改件1
Welding consumables - Solid wires and rods for fusion welding of titanium and titanium alloys - C Amendment 1
焊接耗材.钛和钛合金的熔焊用焊丝和焊条.分类
Welding consumables - Solid wires and rods for fusion welding of titanium and titanium alloys - Classification
ISO 242-1975
硬质合金焊接车刀片
Carbide tips for brazing on turning tools
焊接消耗品.铜和铜合金的熔焊用固体焊丝和焊杆.分类
Welding consumables - Solid wires and rods for fusion welding of copper and copper alloys - Classification
航空航天设施焊接.焊接工和焊接操作工用鉴定试验.金属部件的熔焊
Welding for aerospace applications - Qualification test for welders and welding operators - Fusion welding of metallic components
无损检验.金属存储器.第3部分:焊接接口检验
Non-destructive testing - Metal magnetic memory - Part 3: Inspection of welded joints
焊接耗材.抗蠕变钢的潜弧焊用实心焊丝、管状芯焊条和焊条/焊剂组合制品.分类
Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of creep-resisting steels - Classification
气焊设备.用于压力在300 bar(30兆帕)以下的焊接,切割及相关工艺的调压器和配备气瓶用流量计量装置的调压器
Gas welding equipment - Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa)
焊接、硬钎焊和软钎焊接头 图样上的符号表示法
Welded, brazed symbolic representation on drawings
焊接材料.非合金钢和细晶粒钢的手工金属电弧焊用涂敷焊条.分类
Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification
ISO 26304 Technical Corrigendum 1-2009
焊接消耗品.高强度钢潜弧焊接用实心焊条、管芯焊条和焊条熔接组合件.分类.技术勘误1
Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels - C Technical Corrigendum 1
焊接消耗品.高强度钢的潜弧焊用实心焊条、管状芯焊条和焊条-焊剂熔接物.分类
Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels - Classification
牙科.激光焊接
Dentistry - Laser welding
气焊设备 焊接、切割和有关工艺设备的软管接头
Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes
光端焊接精密钢管 交货技术条件
Plain end welded p Technical conditions for delivery
焊接消耗品.抗蠕变钢手工电弧焊接用涂敷焊条.分类
Welding consumables - Covered electrodes for manual metal arc welding of creep-resisting steels - Classification
ISO 3581 Technical Corrigendum 1-2008
焊接消耗品.不锈钢和耐热钢的手工金属电弧焊接用涂剂焊条.分类.技术勘误1
Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat-resisting steels - C Technical Corrigendum 1
焊料.不锈钢和耐热钢的手工金属电弧焊接用涂剂焊条.分类
Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat-resisting steels - Classification
软钎焊、硬钎焊和钎接焊接用填充金属 符号规定
Filler metal for soft soldering, brazi designation
焊接 碳钢和低合金钢手工焊熔敷金属扩散氢的测定
Welding and allied processes - Determination of hydrogen content in ferritic steel arc weld metal
气焊设备.焊接,切割和相关工艺用橡胶软管
Gas welding equipment - Rubber hoses for welding, cutting and allied processes
ISO 3913 ADD 1-1980
造船 钢质焊接带缆桩 补充1:内河航行用双缆桩
S w addendum 1
造船 钢质焊接带缆桩
S Welded steel bollards
结构钢 冷成型、焊接、结构中空截面 尺寸和截面特性
Structural steels - Cold-formed, welded, structural hollow sections - Dimensions and sectional properties
焊接及相关工艺过程.工艺过程名称和参考号
Welding and allied processes - Nomenclature of processes and reference numbers
金属材料焊接的破坏性试验 横向拉申试验
Destructive tests of welds in metallic materials - Traverse tensile test
光端焊接和无缝钢管 管的尺寸和单位长度重量的一览表
Plain end steel tubes, general tables of dimensions and masses per unit length
气瓶.可重复充装的钢制焊接气瓶.第1部分:试验压力≤60bar
Gas cylinders - Refillable welded steel cylinders - Part 1: Test pressure 60 bar and below
气瓶.可再填充焊接钢瓶.第1部分:试验压力小于等于60ba
Gas cylinders - Refillable welded steel cylinders - Part 1: Test pressure 60 bar and below
焊接吊链 M(4)、S(6)和T(8)级
Chain slings of Grades M (4), S (6) and T (8)
焊接和相关工艺的专用护目镜、滤光镜 应用和透射率的要求
Personal eye-protectors for welding an F Utilisation and transmittance requirements
焊接气瓶用轧制扁钢制品
Flat rolled steel products for welded gas cylinders
气体焊接设备.焊接,切割和相关工艺过程中使用的压力仪表
Gas welding equipment - Pressure gauges used in welding, cutting and allied processes
金属材料焊接的破坏性试验 熔焊接头的焊接金属的纵向拉申试验
Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints
电阻焊接.电极和辅助设备用材料
Resistance welding - Materials for electrodes and ancillary equipment
焊接和相关工艺 用软钎焊和硬钎焊接头 力学试验方法
Assemblies made with soft solders and b Mechanical test methods
ISO 544-2003
焊接消耗品.焊接填充料的技术交货条件.产品类型、尺寸、公差和标记
Welding consumables - Technical delivery conditions for welding filler materials - Type of product, dimensions, tolerances and markings
造船 钢管管路法兰焊接通舱管 PN6、PN10和PN16
S Welded bulkhead pieces with flange PN 6, PN 10 and PN 16
ISO 5817 Technical Corrigendum 1-2006
焊接.钢、镍、钛及其合金的熔焊接缝(束焊除外).缺陷的质量等级.技术勘误1
Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality leve Technical Corrigendum 1
焊接.钢、镍、钛及其合金熔焊接头(束焊除外).缺陷的质量分级
Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections
电阻焊接.点焊电极帽接头
Resistance welding - Spot welding electrode caps
ISO 636-2004
焊接消耗品.非合金钢和细粒钢的钨惰性气体焊用焊条、焊丝和溶敷金属.分类
Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification
焊接和相关工艺.金属材料中几何缺陷的分类.第1部分:熔焊
Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding
焊接及相关工艺 金属材料的几何缺陷的分类 第2部分：压焊
Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 2: Welding with pressure
ISO 669-2000
电阻焊接 电阻焊设备 机械和电要求
Resistance welding - Resistance welding equipment - Mechanical and electrical requirements
热交换器用焊接钢管
Welded steel tubes for heat exchangers
钢管 焊接用管端和配件的预处理
S Preparation of ends of tubes and fittings for welding
焊接耗材 化学分析用焊接金属的熔敷
Welding consumables - Deposition of a weld metal pad for chemical analysis
ISO 6935-3 Technical Corrigendum 1-2000
钢筋混凝土用钢 第3部分:焊接钢筋网 技术勘误1
Steel for the reinforcement of concrete - Part 3: W Technical Corrigendum 1
钢筋混凝土用钢 第3部分:焊接钢筋网
Steel for the reinf part 3: welded fabric
焊接 工作位置 倾角和转角的定义(ISO 的修订本)
W definitions of angles of slope and rotation (revision of ISO )
焊接结构拉曳用弯板链、附件和链轮
Cranked-link drag chains of welded construction, attachments and sprockets
焊接结构工程用弯板链、附件和链轮
Cranked-link mill chains of welded construction, attachments and sprockets
电阻焊接设备的图形符号 两种语言版
Graphical symbols for resistance welding equipment Bilingual edition
气焊设备.焊接、切割及相关工艺用带关闭阀的快速接头
Gas welding equipment - Quick-action couplings with shut-off valves for welding, cutting and allied processes
气焊设备 用于300 bar以下的焊接、切割及相关工艺用汇流系统上的压力调节器
Gas welding equipment - Pressure regulators for manifold systems used in welding, cutting and allied processes up to 300 bar
非焊接吊链 T(8)级
Chain slings assembled by method Grade T(8)
电阻焊接水冷次级线圈连接电缆.第1部分:双导体连接电缆的尺寸和要求
Water-cooled secondary connection cables for resistance welding - Part 1: Dimensions and requirements for double-conductor connection cables
电阻焊接水冷次级线圈连接电缆.第2部分:单根导线连接电缆的尺寸和要求
Water-cooled secondary connection cables for resistance welding - Part 2: Dimensions and requirements for single-conductor connection cables
电阻焊接水冷次级线圈连接电缆 第3部分:试验要求
Water-cooled secondary connection cables fo part 3: test requirements
气焊设备 焊接、切割和相关工艺设备用软管组件规范
Gas welding equipment - Specification for hose assemblies for equipment for welding, cutting and allied processes
焊接 奥氏体和成双铁素体奥氏体镍-铬(Cr-Ni)不锈钢焊接金属中铁素体数(FN)的测定
Welding - Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals
涂装油漆和有关产品前钢材的预处理.表面清洁度的目视评定.第3部分:焊接、切边及其它表面缺陷区域的处理等级
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation grades of welds, edges and other areas with surface imperfections
ISO 857-1-1998
焊接和相关工艺 术语 第1部分:金属焊接工艺 两种语言版
Welding and allied processes - Vocabulary - Part 1: Metal welding processes
ISO 857-2-2005
焊接和相关工艺.词汇.第2部分:软钎焊和铜焊工艺及相关术语
Welding and allied processes - Vocabulary - Part 2: Soldering and brazing processes and related terms
金属材料焊接的破坏性试验 硬度试验 第1部分：弧焊接头的硬度试验
Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints
金属材料焊接的破坏性试验.硬度试验.第2部分:焊接件的显微硬度试验
Destructive tests on welds in metallic materials - Hardness testing - Part 2: Microhardness testing of welded joints
金属材料焊接的破坏性试验 碰撞试验 试验样品的位置、切口的朝向和检查
Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination
金属材料焊接的破坏性试验 断裂试验
Destructive tests on welds in metallic materials - Fracture test
金属材料焊接的破坏性试验.十字形接缝和搭接缝的抗拉试验
Destructive tests on welds in metallic materials - Tensile test on cruciform and lapped joints
压力用途的无缝钢管和焊接(埋弧焊除外)钢管 液压密封验证电磁试验法
Seamless and welded (except submerged arc-welded) steel tubes f electromagnetic testing for verification of hydraulic leak-tightness
压力用途的无缝钢管和焊接(埋弧焊除外)钢管 检测纵向缺陷用全周边超声波试验
Seamless and welded (except submerged arc-welded) steel tubes f full peripheral ultrasonic testing for the detection of longitudinal imperfections
压力用途的无缝钢管和焊接(埋弧焊除外)钢管 检测缺陷用涡流电流试验
Seamless and welded (except submerged arc-welded) steel tubes f eddy current testing for the detection of imperfections
压力用途的钢锻件和轧制或锻造的棒材 交货技术条件 第4部分:高强度可焊接细粒钢
Steel forgings and rolled or forged bars for pressure purposes - Technical delivery conditions - Part 4: Weldable fine grain steels with high proof strength
压力用途扁钢产品.交货技术条件.第6部分:淬火和回火的可焊接细粒钢
Steel flat products for pressure purposes - Technical delivery conditions - Part 6: Weldable fine grain steels, quenched and tempered
压力用途的焊接钢管 交货技术条件 第1部分:规定室温性能的非合金钢管
Welded steel tubes f technical part 1: unalloyed steel tubes with specified room temperatures properties
压力用途的焊接钢管 交货技术条件 第2部分:规定高温性能的电阻焊接和感应焊接非合金钢管和合金钢管
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified elevated temperature properties
压力用途的焊接钢管 交货技术条件 第3部分:规定低温性能的电阻焊接和感应焊接非合金钢管和合金钢管
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified low temperature properties
压力用途的焊接钢管 交货技术条件 第4部分:规定高温性能的埋弧焊接非合金钢管和合金钢管
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Submerged arc-welded unalloyed and alloyed steel tubes with specified elevated temperature properties
压力用途的焊接钢管 交货技术条件 第5部分:规定低温性能的埋弧焊接非合金钢管和合金钢管
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc-welded unalloyed and alloyed steel tubes with specified low temperature properties
压力用途的焊接钢管 交货技术条件 第6部分:奥氏体不锈钢管的焊接长度
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Longitudinally welded austenitic stainless steel tubes
压力用途的无缝钢管和焊接(埋弧焊除外)钢管 检测纵向缺陷用铁磁钢管全周边磁转换/磁链试验
Seamless and welded (except submerged arc-welded) steel tubes f full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of longitudinal imperfections
气焊设备.用于气体焊接、切割和相关工艺过程设备的材料
Gas welding equipment - Materials for equipment used in gas welding, cutting and allied processes
焊接和相关工艺.关于接缝准备的建议.第1部分:钢的手动金属电弧焊接、气体保护金属电弧焊、气焊、TIG焊接和
Welding and allied processes - Recommendations for joint preparation - Part 1: Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels
焊接和相关工艺 接头的制备 第2部分:钢的埋弧焊
Welding and allied processes - Joint preparation - Part 2: Submerged arc welding of steels
焊接和相关工艺 接头制备的建议 第3部分:铝及铝合金的金属焊条惰性气体保护焊和钨焊条惰性气体保护焊
Welding and allied processes - Recommendations for joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys
焊接和相关工艺.接头制备的建议.第4部分:包钢
Welding and allied processes - Recommendations for joint preparation - Part 4: Clad steels
焊接消耗品.硬表面堆焊.微观结构
Welding consumables - Hardfacing classification - Microstructures
焊接.金属材料分类体系指南
Welding - Guidelines for a metallic materials grouping system
金属材料焊接的有损试验.焊接的热裂试验.弧焊工艺.第3部分:外部负载试验
Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - Part 3: Externally loaded tests
焊接.金属材料焊接的推荐.第1部分:电弧焊接通用指南
Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding
焊接.金属材料焊接的推荐.第2部分:铁素体钢的电弧焊接
Welding - Recommendations for welding of metallic materials - Part 2: Arc welding of ferritic steels
焊接.金属材料焊接的推荐.第3部分:不锈钢的电弧焊接
Welding - Recommendations for welding of metallic materials - Part 3: Arc welding of stainless steels
焊接.金属材料焊接的推荐.第4部分:铝和铝合金的电弧焊接
Welding - Recommendations for welding of metallic materials - Part 4: Arc welding of aluminium and aluminium alloys
焊接.金属材料焊接的推荐.第5部分:覆层钢的焊接
Welding - Recommendations for welding of metallic materials - Part 5: Welding of clad steels
焊接.金属材料焊接建议.第6部分:激光束焊接
Welding - Recommendations for welding of metallic materials - Part 6: Laser beam welding
焊接.金属材料焊接的推荐.第7部分:电子束焊接
Welding - Recommendations for welding of metallic materials - Part 7: Electron beam welding
焊接.避免冷裂的标准化方法的比较
Welding - Comparison of standardised methods for the avoidance of cold cracks
焊接材料分组系统.欧洲材料
Welding - Grouping systems for materials - European materials
焊接.材料分组系统.美国材料
Welding - Grouping systems for materials - American materials
焊接.材料分组系统.日本材料
Welding - Grouping systems for materials - Japanese materials
焊接消耗品.规范中预测的和实测的FN.IIW委员会IX专家的见解
Welding consumbales - Predicted and measured FN in specifications - A position statement of the experts of IIW Commission IX
焊接和相关工艺.词汇
Welding and related processes - Vocabulary
薄壁金属容器 用于乳类及乳制品的两端经焊接的抽气圆罐 容量和相应直径
Light ga Round vent-hole cans with soldered ends for mi Capacities and related diameters
焊接和相关工艺的卫生和安全.烟尘和气体取样的实验室法.第5部分:完全或部分有机材料组成的产品在焊接或切割
Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 5: Identification of thermal-degradation products generated when welding or cutting through products composed wholly or partly of organic materials
焊接及相关工艺.缺陷的名称与符号系统
Welding and allied processes - Designation system for imperfections