11Quick LinksQuick LinksPlease selectIrony XLiteSistem51Surfing the WaveMediterranean Dolce VitaThis is My WorldSWATCH.TVProteamEventsThe Swatch Art Peace HotelAbout Swatch ClubStore LocatorNewsletterPressUser ManualsSwatch FinderOfficial Swatch Website - Swatch International
Find your manual
Chronograph Settings
Readjustment
Battery Change
Additional functions
Retrograde
Chrono Automatic
Swatch Touch
Retrograde
Chrono Medium
Skin Chrono
Touch / Fun
Touch / Fun
Swatch Touch
Loomi Touch
Swatch Touch
Timing Mode
Add Function
Tachymeter
Timing Mode
Add Function
Tachymeter
Timing Mode
Add Function
Tachymeter
Press&1. The upper push-button to start the chronograph.2. The lower push-button to read the intermediary time.3. Once again to continue (repeat the last two actions as many times as you wish to read the intermediary time while the chrono carries on).4. The upper push-button to stop finally.5. The lower push-button to reset.
A: Normal position of the crownC: Position for setting the timeTo set the time, pull the crown out to position C and turn clockwise or anticlockwise. After resetting has been completed, press the crown back to position A.
CURRENT MANUAL: Battery Change | Skin
Battery Change
Open carefully the battery cover with a thin screwdriver. Press the battery and cover unit from underneath firmly back to the watch case.
CURRENT MANUAL: Readjustment | Retrograde
Readjustment
Adjusting the chronograph (e.g.: after battery change or a hard shock)1. Pull the crown to position B.2. Press the lower button to reach the position 0 with the hand of the minutes counter.3. Pull the crown to the position C.4. Press the upper button to reach the position 3h00 with the hand of the seconds counter.5. Press the lower button to reach the position 0 with the hand of the 1/2 min. counter.6. Press the crown to position A.
CURRENT MANUAL: Battery Change | Standard
Important:When replacing the battery, be carful not to damage the (+) terminal which is on the side. The (-) terminal is at the bottom.
CURRENT MANUAL: Readjustment | Skin Chrono
Readjustment
Adjusting the chronograph (e.g.: after battery change or a hard shock):Press&1. Simultaneously P1 + P2 until A, B and C complete the cycle.2. P2. A completes a whole cycle.3. P1 to align A.4. P2 again, and B completes a whole cycle.5. P1 to align B.6. P2 again, and C completes a whole cycle.7. P1 to align C.8. Simultaneously P1 + P2 again, to complete the readjustment process. The watch will acknowledge this procedure with a revolution on all displays. If P1 + P2 are not pressed within 5 seconds, the watch will carry out the acknowledgement function automatically.&&
CURRENT MANUAL: Additional functions | Loomi
Light Function
CURRENT MANUAL: Chronograph Settings | Retrograde | Timing Mode
Timing Mode
Press&1. The upper push-button to start the chronograph.2. Once again to read the elapsed time.3. The lower push-button to reset.Retrograde: the duration of timing is limited to 2 hours.
CURRENT MANUAL: Readjustment | Standard
Readjustment
Adjusting the chronograph (e.g.: after battery change or a hard shock)1. Pull the crown to position B.2. Press the upper button to reach the position 12h00 with the hand of the 1/10 sec. counter.3. Pull the lower button to reach the position 12h00 with the hand of the seconds.4. Pull the crown to the position C.5. Press the upper button to reach the position 12h00 with the hand of the minutes counters.6. Press the crown to position A.
CURRENT MANUAL: Additional functions | Loomi Touch
Additional Functions
Touch your Swatch.Loomi on.
To set the date, pull the crown out to position B, and turn anticlockwise. To set the day, turn the crown in a clockwise direction. After resetting has been completed, press the crown back to position A.
CURRENT MANUAL: Chronograph Settings | Retrograde | Tachymeter
Tachymeter
Measure the speed Base 100 or 1000 m.Press...1. The upper push-button when an action starts.2. Once again to stop after a distance of 100 or 1000 m. Read the speed indicated by the 60 seconds counter (Retrograde: 30 sec.) on the tachymeter scale (km/h = kph).3. The lower push-button to reset.
CURRENT MANUAL: Additional functions | Pop
Additional Functions
Note: Wear your Swatch simply with its band or try &popping& it directly onto your clothes.
CURRENT MANUAL: Additional functions | Scuba
Additional Functions
Using the adjustment ringFor setting the start time and duration of an activity. Line up the marker on the adjustment ring with the minute hand. Timing starts at the time indicated by the marker. The elapsed time is indicated by the minute hand pointing the number on the adjustement ring.IMPORTANT: After being submerged in salt water, the Scuba 200 Chrono should always be rinsed with fresh water.CAUTION: The Irony Scuba 200 Chrono is not a professional diving watch.
CURRENT MANUAL: Chronograph Settings | Standard | Add Function
Add Function
Press&1. The upper push-button to start.2. Press the upper push-button to read the first time.3. Press the upper push-button to restart the chronograph.4. Press the upper push-button to read the additional time (repeat these two steps as many time as you wish).5. Press the lower push-button to reset.
CURRENT MANUAL: Readjustment | Touch / Fun
Readjustment
Test and inilisationPush crown for 5 secs. If both hands go to 12 o&clock, test is ok. Push crown again and hands go back to time.If hands are not exactly at 12 o&clock, pull crown to position 2. Turn clockwise to readjust hour hand. Turn counterclockwise to readjust minute hand. Push crown back and hands turn back to show time.
CURRENT MANUAL: Chronograph Settings | Standard | Tachymeter
Tachymeter
Measure the speed Base 100 or 1000 m. Press...1. The upper push-button when an action starts.2. Once again to stop after a distance of 100 or 1000 m. Read the speed indicated by the 60 seconds counter (Retrograde: 30 sec.) on the tachymeter scale (km/h = kph).3. The lower push-button to reset.&&
CURRENT MANUAL: Battery Change | Touch / Fun
Battery Change
1. Open carefully the plastic cover with a thin screwdriver.2. Replace the battery, plus (+) side up.3. Press the plastic cover firmly back on its position (small click). Note: Check carefully that the rubber gasket its on correct position and is not harmed.&
CURRENT MANUAL: Chronograph Settings | Chrono Automatic | Timing Mode
Timing Mode
Press&1. The upper push-button to start the chronograph.2. Once again to read the elapsed time.3. The lower push-button to reset.&
Press&1. The upper push-button to start the chronograph.2. The lower push-button to read the intermediary time.3. Once again to continue (repeat the last two actions as many times as you wish to read the intermediary time while the chrono carries on).4. The upper push-button to stop finally.5. The lower push-button to reset.
CURRENT MANUAL: Chronograph Settings | Standard | Timing Mode
Timing Mode
Press& 1. The upper push-button to start the chronograph. 2. Once again to read the elapsed time. 3. The lower push-button to reset.
CURRENT MANUAL: Chronograph Settings | Chrono Automatic | Add Function
Add Function
Press&1. The upper push-button to start.2. Press the upper push-button to read the first time.3. Press the upper push-button to restart the chronograph.4. Press the upper push-button to read the additional time (repeat these two steps as many time as you wish).5. Press the lower push-button to reset.
CURRENT MANUAL: Chronograph Settings | Chrono Automatic | Tachymeter
Tachymeter
Measure the speed Base 100 or 1000 m. Press...1. The upper push-button when an action starts.2. Once again to stop after a distance of 100 or 1000 m. Read the speed indicated by the 60 seconds counter& on the tachymeter scale (km/h = kph).3. The lower push-button to reset.
CURRENT MANUAL: Chronograph Settings | Retrograde | Add Function
Add Function
Press&1. The upper push-button to start.2. Press the upper push-button to read the first time.3. Press the upper push-button to restart the chronograph.4. Press the upper push-button to read the additional time (repeat these two steps as many time as you wish).5. Press the lower push-button to reset.
To set the time, pull crown to position 2. Turn slowly to correct minutes. Turn quickly to correct hours. After resetting has been completed, push the crown back.&
CURRENT MANUAL: Readjustment | Chrono Medium
Readjustment
Adjusting the chronograph (e.g.: after battery change or a hard shock)1. Pull the crown to position B.2. Press the lower button to reach the position 12h00 with the hand of the minutes counter.3. Pull the crown to the position C.4. Press the upper button to reach the position 12h00 with the hand of the seconds counter.5. Press the lower button to reach the position 12h00 with the hand of the 1/10 sec. counter.6. Press the crown to position A.
1. Touch 1 sec
2. Active Mode
3. Touch 1.5 sec for backlight
Timeout after 20 sec stays in last activated mode
For an optimal use of the touch interface, wear the watch on your wrist or touch the battery cover
4. Scroll to change function
5. Seconds
7. Symbols
8. Minutes
9. Chrono, alarm, timer are only visible when active
10. Touch 1.5 sec
11. Short touch
12. Touch 1.5 sec to confirm
13. Scroll left for - / Scroll right for +
1. Touch 1 sec
2. Active Mode
3. Touch 1.5 sec for backlight
Timeout after 20 sec stays in last activated mode
For an optimal use of the touch interface, wear the watch on your wrist or touch the battery cover.
4. Scroll to change function
5. Date Symbol
9. Touch 1.5 sec
10. Short touch
11. Touch 1.5 sec to confirm
12. Scroll left for - / Scroll right for +
CURRENT MANUAL: Additional functions | Swatch Touch | Alarm
1. Touch 1 sec
2. Active Mode
3. Touch 1.5 sec for backlight. Timeout after 20 sec stays in last activated mode.
For an optimal use of the touch interface, wear the watch on your wrist or touch the battery cover
4. Scroll to change function
5. Alarm Symbol
7. Alarm ON
8. Minutes
9. Touch to stop alarm
10. Alarm OFF
11. Alarm based on T1, Alarm remains off until reactivated
12. Touch 1.5 sec
13. Short touch
14. Touch 1.5 sec to confirm
15. Scroll left for - / Scroll right for +
CURRENT MANUAL: Chronograph Settings | Swatch Touch
Chronograph Settings
1. Touch 1 sec
2. Active Mode
3. Touch 1.5 sec for backlight
Timeout after 20 sec stays in last activated mode
For an optimal use of the touch interface, wear the watch on your wrist or touch the battery cover
4. Scroll to change function. Touch 1.5 sec to confirm.
7. Restart
9. Touch 1.5 sec for reset
CURRENT MANUAL: Additional functions | Alarm | Alarm
TOUCH ALARM
SHOW ALARM TIME
1. Touch your Swatch.Hands move to show alarm time for approx. 4 secs.
STOP ALARM
2. Touch your Swatch to stop alarm.
Switch alarm on/off and set alarm time.
ALARM ON/OFF
3. Press crown and hands go to actual mode on or off.
&CHANGE ON/OFF
4. Press crown and hands go to actual mode on or off. Press crown again to change mode.
SHOW LAST ALARM
5. Pull crown to position 1 and the hands go to the last alarm time.
&SET NEW ALARM
6. To set a new alarm time, turn crown (turn slowly = minutes, turn quickly = hours).
7. Then push crown back and hands turn back to time and alarm mode will be &on&.
ALARM DEMO
8. Press crown for 2 secs. to start alarm demo.
9. To stop press crown again.&
Important: When the hands do not show correctly ON-OFF (alarm mode), the Touch Alarm must be adjusted (e.g. after battery change or a hard knock).
1. Touch 1 sec
2. Active Mode
3. Touch 1.5 sec for backlightTimeout after 20 sec stays in last activated mode.
For an optimal use of the touch interface, wear the watch on your wrist or touch the battery cover
4. Scroll to change function
5. Touch 1.5 sec
6. Short touch
7. Touch 1.5 sec to confirm
8. Scroll left for - / Scroll right for +
11. Timer max. 99h 59'59"
CURRENT MANUAL: Additional functions | Swatch Touch | Beep
Swatch Touch Beep
1. Touch 1 sec
2. Active Mode
3. Touch 1.5 sec for backlight. Timeout after 20 sec stays in last activated mode
For an optimal use of the touch interface, wear the watch on your wrist or touch the battery cover
4. Scroll to change function. Touch 1.5 sec to confirm.
5. Beep ON
6. Beep OFF
7. Touch 1.5 sec to confirm.
CURRENT MANUAL: Battery Change | Swatch Touch
Battery Change
1. Battery Change
2. Battery ref: CR
X 3.20/3.00V
Video manuals
iBook Download
PDF Download
Quick LinksQuick LinksPlease selectIrony XLiteSistem51Surfing the WaveMediterranean Dolce VitaThis is My WorldSWATCH.TVProteamEventsThe Swatch Art Peace HotelAbout Swatch ClubStore LocatorNewsletterPressUser ManualsSwatch Finder
Follow us on